Making a Purchase
Payment
You must enter your payment details at the time you place your order. However, payments will not be processed until availability of the products you ordered have been confirmed and your order has been accepted. All prices are and payment must be made in Australian currency.
Technical Advice
This information and all further technical advice is based on our present knowledge and experience. However, it implies no liability or other legal responsibility on our part, including with regard to existing third party intellectual property rights, especially patent rights. In particular, no warranty, whether express or implied, or guarantee of product properties in the legal sense is intended or implied. We reserve the right to make any changes according to technological progress or further developments. The customer is not released from the obligation to conduct careful inspection and testing of incoming goods.
Performance of the product described herein should be verified by testing, which should be carried out only by qualified experts in the sole responsibility of
a customer. Reference to trade names used by other companies is neither a recommendation, nor does it imply that similar products could not be used.
Samples, information on our website
The samples we send you are intended to give you an idea of the available colours , however, such colours neither represent standardised nor guaranteed colours. This applies also to the pictures of the goods on our website.
Information on our website concerning the thickness of the material shall have reference value and may deviate due to the production process. You will find the thickness tolerances on the relevant product information page.
Use of our website
1. Introduction
The Terms of Use of the KF Plastics website include these Terms and Conditions, the Privacy Notice and any other terms and conditions that appear in or are linked to the KF Plastics website (Additional Terms and Conditions).
2. Website content and access
While KF Plastics endeavours to take reasonable care in preparing and maintaining the information on this website we do not warrant the accuracy, reliability, adequacy or completeness of any of the website content. You acknowledge and accept that the website content may include technical inaccuracies and typographical errors. The website content is subject to change at any time without notice and may not necessarily be up to date or accurate at the time you view it.
It is your responsibility to enquire with us directly to ensure the accuracy and currency of the material or information you seek to rely upon. To the extent permitted by law KF Plastics disclaims all liability for loss directly or indirectly arising from your use of or reliance on the website and the website content.
KF Plastics does not guarantee that access to the KF Plastics website will be uninterrupted or that the website is free from viruses or anything else which may damage any computer which accesses the KF Plastics website or any data on such a computer.
3. Limitation of liability
To the maximum extent permitted by law KF Plastics excludes completely all liability whatsoever for any loss or damage of any kind (including special, indirect or consequential loss and including loss of business profits) however caused (including negligence) arising out of or in connection with the website content and the use or performance of the KF Plastics website.
Where the law implies a warranty into these Website Terms and Conditions which may not lawfully be excluded KF Plastics’s liability for breach of such a warranty shall be limited at its option, to any one or more of the following:
(a) in the case of goods, to any one it determines of the following: replacement of the goods or the supply of equivalent goods; repair of the goods; payment of the cost of replacing the goods or acquiring equivalent goods; or payment of the cost of having the goods repaired; and
(b) in the case of services, to either supplying the services again or payment of the cost of having the services supplied again.
4. Intellectual property
The materials displayed on this website, including without limitation all editorial materials, information, photographs, illustrations, artwork and other graphic materials, and names, logos and trade marks, are the property of KF Plastics and are protected by copyright, trade mark and other intellectual property laws. Any such content may be displayed and printed solely for your personal, non-commercial use within your organisation only provided that any copyright notice on such a display or page is not removed. You agree not to reproduce, retransmit, distribute, disseminate, sell, publish, broadcast or circulate any such material to any third party without the express prior written consent of KF Plastics.
Save for the above, and unless expressely granted, KF Plastics does not grant any licence or right in, or assign all or part of, its intellectual property rights in the content or applications incorporated into the KF Plastics website or in the user interface of the KF Plastics website.
5. Submissions
Any material you send to us on or via the KF Plastics website will be deemed to be non-confidential and non-proprietary. This includes any data, questions, comments, suggestions, ideas or other information. We will be entitled to use such material for any purpose without compensation to you.
6. Third party websites
The KF Plastics Website may contain links to other websites operated, controlled or produced by third parties. Unless otherwise indicated, KF Plastics does not control, endorse, sponsor or approve any such third party websites or their content nor does KF Plastics provide any warranty or take any responsibility whatsoever for any aspect of those websites or their content.
7. Links to KF Plastics website
If you wish to establish a link to this website, you must first seek approval from KF Plastics. To seek approval, please contact your account manager. If you don’t have one or are unsure, please email KF Plastics’s brand team.
The following information will be required to assess your request:
- the URL of the website that you seek to establish a link from
- a brief description of your website
- the reason that you wish to establish a link.
If KF Plastics agrees to your proposed link, you must comply with any terms and conditions imposed by KF Plastics as a condition of such agreement. If the nature and/or content of your website changes in any significant way, you must contact KF Plastics and provide a new description of your website.
8. Interference with website
You must not attempt to change, add to, remove, deface, hack or otherwise interfere with this website or any material or content displayed on the KF Plastics website.
9. Jurisdiction
These Terms and Conditions are governed by and construed in accordance with the State of New South Wales, Australia. In the event that a dispute arises from these Website Terms and Conditions, you agree to submit to the non-exclusive jurisdiction of the courts of New South Wales, Australia.